Welcome to ATA, IP phone, Dect phone, Softswitch, billing world!

     Modules
· Home
· Downloads
· Feedback
· Knowledge Base
· Recommend Us
· Search
· Submit News
· Web Links

     Search
· All Categories
· Device Configuration
· FAQ
· Network Construction

     Login
Nickname

Password

Don't have an account yet? You can create one. As a registered user you have some advantages like theme manager, comments configuration and post comments with your name.

 SHANG332 for Company Auto Reception

shang 332
SHANG332 for Company Auto Reception


1.      General

For SHANG332 has the IVR( interactive voice response) and also has the extension line FXS and the trunk line FXO. It can provide basic PBX function for small company. It will be easier to change from old PBX to VOIP’s new feature and cheaper price.

Local auto reception


For some basic requirement in small office, it is only need this device to take place the old PBX. It has the IVR function. When calls are in, it connected automatically, play welcome message to the caller.  the caller could select to call the extension or transfer to the reception person. It is used as same as what we did on the PBX. But because it has voip interface, call could be over VOIP network.



2.      Upgrade method:

As the up figure showed, there is a 4FXO12FXS device. It’s FXS port  use 8001, 8002, 8003, 8004 registered to server 192.216.224.85.

Configuration details:

The equipments’ IP address and SIP information.


In the “quick setup” page, fill the network parameter and VOIP parameter.

2、Calls from pstn to voip by FXO ports setting



In the “FXO Advanced Configuration” page set working mode to “normal”. It can play IVR or just a dial tone.  For a small company, this IVR is the welcome message.


At"port configuration" page, set the  phone number 8001、8002、8003、8004.


In the Routing Direction Table, add 8xxx to ip.


In the Peer to Peer Route Table, add 8xxx to local ip.

Those setting will make the call from fxo can reach extensions 8xxx by second time dialing.

3 long distance call setting


In the Routing Direction Table, add 0 prefixed number to ip. This will add those calls to softswitch.

4、VOIP call from FXO to PSTN


At"port configuration" page, set the  FXO phone number 9.


In the Number Change Rule Table , add a rule to delete prefix 9.


In the regeneration Number Change table, aplly those rule to each port.


In the Routing Direction Table, add 9 prefixed number to PSTN. This will add those calls to PSTN.

After that, end user can dial 9 + phone number to PSTN

Notes:

For record welcome message please contact us.




 
     Related Links
· More about shang 332
· News by luis


Most read story about shang 332:
The SHANG332 used as the application of the Calling Card


     Article Rating
Average Score: 0
Votes: 0

Please take a second and vote for this article:

Excellent
Very Good
Good
Regular
Bad


     Options

 Printer Friendly Printer Friendly


"Login" | Login/Create an Account | 0 comments
The comments are owned by the poster. We aren't responsible for their content.

No Comments Allowed for Anonymous, please register




All logos and trademarks in this site are property of Telecomchinasourcing.com © 2005
PHP-Nuke Copyright © 2005 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the license.
Page Generation: 0.45 Seconds